Incident to report to a regulator?Incident to report? Intake Line

CRA vs PCI DSS

Where they overlap, where they differ and which asks more, topic by topic, with their deadlines and fines side by side.

CRAManufacturers of products with digital elements

PCI DSSEntities that store, process or transmit account data, or can affect its security

At a Glance

They differ on 24 of 30 topics. Each verdict names what it rests on; read the wording before relying on it.

  • CRA Asks more on 0 topics Alone on 10 topics More detailed on 1 topic
  • PCI DSS Asks more on 0 topics Alone on 8 topics More detailed on 5 topics
Requirements per topic and verdict
Topic CRAPCI DSS Verdict
Governance
Management accountability CRA: – PCI DSS: 1 Only PCI DSSno specific requirement on the other side in the acts covered
Roles and independence CRA: 1 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered
Security policy CRA: – PCI DSS: 2 Only PCI DSSno specific requirement on the other side in the acts covered
Awareness and training CRA: – PCI DSS: 2 Only PCI DSSno specific requirement on the other side in the acts covered
Risk management
Risk assessment CRA: 1 PCI DSS: 1 Both cover itread the wording below
Review, audit and improvement CRA: 5 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered
Asset management CRA: 1 PCI DSS: 1 Both cover itread the wording below
Protection
Access control CRA: 1 PCI DSS: 4 PCI DSS more detailedmore requirements on this, not necessarily stricter
Authentication CRA: 1 PCI DSS: 5 PCI DSS more detailedmore requirements on this, not necessarily stricter
Cryptography and encryption CRA: 1 PCI DSS: 3 PCI DSS more detailedmore requirements on this, not necessarily stricter
Data security CRA: 2 PCI DSS: 4 PCI DSS more detailedmore requirements on this, not necessarily stricter
Network security CRA: – PCI DSS: 7 Only PCI DSSno specific requirement on the other side in the acts covered
Secure communications CRA: – PCI DSS: 2 Only PCI DSSno specific requirement on the other side in the acts covered
Secure acquisition and development CRA: 2 PCI DSS: 3 Both cover itread the wording below
Configuration, change and patch management CRA: 2 PCI DSS: 1 Both cover itread the wording below
Vulnerability handling CRA: 7 PCI DSS: 4 Both cover itread the wording below
Human resources security CRA: – PCI DSS: 1 Only PCI DSSno specific requirement on the other side in the acts covered
Physical and environmental security CRA: – PCI DSS: 5 Only PCI DSSno specific requirement on the other side in the acts covered
Detection and response
Monitoring and detection CRA: 1 PCI DSS: 12 PCI DSS more detailedmore requirements on this, not necessarily stricter
Incident handling CRA: – PCI DSS: 1 Only PCI DSSno specific requirement on the other side in the acts covered
Incident classification CRA: 1 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered
Reporting to authorities CRA: 4 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered
Informing customers and the public CRA: 4 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered
Threat intelligence and information sharing CRA: 1 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered
Continuity and resilience
Business continuity and crisis management CRA: 1 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered
Security testing CRA: 1 PCI DSS: 2 Both cover itread the wording below
Third parties and supply chain
Supplier and third-party risk CRA: 4 PCI DSS: 2 CRA more detailedmore requirements on this, not necessarily stricter
Privacy and data protection
Privacy by design and by default CRA: 1 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered
Supervision and enforcement
Cooperation with supervisors CRA: 7 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered
Penalties and liability CRA: 3 PCI DSS: – Only CRAno specific requirement on the other side in the acts covered

What This Covers

The obligations below are summarised from the acts listed here, grouped by topic. Where a side shows nothing on a topic, the acts covered have no specific requirement on it; an act not yet included, national guidance or a supervisor's expectations may still say more. Use it to see where the regimes differ, not as a compliance checklist.

Included

  • CRA Regulation (EU) 2024/2847 of the European Parliament and of the Council of 23 October 2024 Articles 13 to 16, 19 to 22, 28, 30 to 32, 64 · Annex · 42 requirements
  • CRA Product Categories Commission Implementing Regulation (EU) 2025/2392 of 28 November 2025 on the technical description of the categories of important and critical products with digital elements pursuant to Regulation (EU) 2024/2847 of the European Parliament and of the Council (OJ L, 2025/2392, 1.12.2025) Articles 2, 7, 8, 32 · Annex · 4 requirements
  • Kamerstuk 36875 Kamerstukken 36875, Regels ter uitvoering van Verordening (EU) 2024/2847 (Uitvoeringswet verordening cyberweerbaarheid), voorstel van wet (36875, nr. 2) and memorie van toelichting (36875, nr. 3) Articles 1 to 3, 5, 7 · 5 requirements
  • S.L. 591.06 L.N. 238 of 2026, Cyber Resilience Regulations, 2026, made under article 58 of the Malta Digital Innovation Authority Act (Cap. 591); Government Gazette No. 21,717, 11 September 2026; S.L. 591.06 4 requirements

Status

Reviewed against the official texts.

Included

  • PCI DSS PCI DSS v4.0.1 (June 2024) 63 requirements

Status

Reviewed against the official texts.

Key Numbers

Deadline

CRA: Final report within 14 days of a corrective or mitigating measure being available

PCI DSS: Not in the acts covered

Threshold

CRA: Harm to protection of sensitive or important data or functions, or malicious code

PCI DSS: Not in the acts covered

Goes to

CRA: Manufacturer and market surveillance authorities (Importers); Manufacturer and market surveillance authorities (Distributors)

PCI DSS: Not in the acts covered

Evidence to keep

CRA: Documented risk assessmentA structured process for identifying risks, analysing their possible effects and judging which need attention. In information security, this means examining threats, weaknesses and existing safeguards to prioritise risks to information and business operations. The assessment informs decisions about reducing or accepting risk and should be reviewed as circumstances change. in the technical documentation; EU declaration of conformity, at least 10 years or the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer (Importers); Technical documentation and EU declaration, at least 10 years or the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer; Software bill of materialsA formal record of the details and supply chain relationships of the components included in the software of a product. Under the CRA, manufacturers must draw up an SBOM in a commonly used, machine-readable format covering at least the top-level dependencies.

PCI DSS: Not in the acts covered

Incident reports go to

CRA: Coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity, via the single reporting platform; Coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity, via the single reporting platform; Coordinating CSIRTComputer Security Incident Response Team of the main establishment and ENISAEuropean Union Agency for Cybersecurity

PCI DSS: Not in the acts covered

First notice of an incident

CRA: Within 24 hours of becoming aware; Within 24 hours of becoming aware

PCI DSS: Not in the acts covered

Incident notification

CRA: Within 72 hours of becoming aware; Within 72 hours of becoming aware

PCI DSS: Not in the acts covered

Intermediate report

CRA: On request of the coordinating CSIRTComputer Security Incident Response Team; On request of the coordinating CSIRTComputer Security Incident Response Team

PCI DSS: Not in the acts covered

Final report

CRA: Within one month of the incident notification

PCI DSS: Not in the acts covered

External assessment or certification

CRA: Module A, modules B and C, module H, or an EU certification scheme; Third-party assessment or certification, depending on class (Manufacturers of important and critical products)

PCI DSS: Not in the acts covered

Maximum fines

CRA: Up to EUR 15,000,000 or 2.5% of worldwide annual turnover, whichever is higher (Manufacturers); Up to EUR 10,000,000 or 2% of worldwide annual turnover, whichever is higher (Economic operators and others subject to the listed articles); Up to EUR 5,000,000 or 1% of worldwide annual turnover, whichever is higher (Economic operators)

PCI DSS: Not in the acts covered

Governance

Management accountability

Only PCI DSS no specific requirement on the other side in the acts covered

NIST CSF 2.0 GV.RR, GV.OV · ISO/IEC 27001:2022 Clause 5.1, A.5.4

Nothing in the acts covered.

  • PCI DSS compliance is managed

    PCI DSSPayment Card Industry Data Security Standard compliance is managed.

    PCI DSS, Requirement 12.4

Roles and independence

Only CRA no specific requirement on the other side in the acts covered

NIST CSF 2.0 GV.RR · ISO/IEC 27001:2022 A.5.2, A.5.3

  • When others become the manufacturer

    Applies to: Importers and distributors who sell a product under their own name or trademark or substantially modify it, and others who substantially modify a product

    An importer or distributor that sells a product under its own name or trademark, or substantially modifies it, is treated as the manufacturer and is subject to Articles 13 and 14. Any other person who substantially modifies a product and makes it available is also a manufacturer, for the affected part or the whole product if its overall cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. is affected.

    CRA, Articles 21, 22

Nothing in the acts covered.

Security policy

Only PCI DSS no specific requirement on the other side in the acts covered

NIST CSF 2.0 GV.PO · ISO/IEC 27001:2022 A.5.1

Nothing in the acts covered.

  • A comprehensive information security policy that governs and provides direction for protection of the entity's information assets is known and current

    A comprehensive information securityProtecting information and the systems that handle it so that only authorised people can access it, it remains accurate and complete, and it is available when needed. These aims are called confidentiality, integrity and availability. Information security combines organisational requirements, staff practices and technical safeguards to reduce risks such as disclosure, alteration, disruption or destruction. policy that governs and provides direction for protection of the entity's information assets is known and current.

    PCI DSS, Requirement 12.1

  • Acceptable use policies for end-user technologies are defined and implemented

    Acceptable use policies for end-user technologies are defined and implemented.

    PCI DSS, Requirement 12.2

Awareness and training

Only PCI DSS no specific requirement on the other side in the acts covered

NIST CSF 2.0 PR.AT · ISO/IEC 27001:2022 A.6.3

Nothing in the acts covered.

  • Anti-phishing mechanisms protect users against phishing attacks

    Anti-phishing mechanisms protect users against phishingAn attack that impersonates a trusted person or organisation through electronic communications, often an email or a fake website, to trick someone into revealing information such as passwords or bank details. The attacker uses apparent familiarity or credibility to persuade the person to respond. Training simulations practise recognising these deceptive requests. attacks.

    PCI DSS, Requirement 5.4

  • Security awareness education is an ongoing activity

    Security awareness education is an ongoing activity.

    PCI DSS, Requirement 12.6

Risk management

Risk assessment

Both cover it read the wording below

NIST CSF 2.0 ID.RA · ISO/IEC 27001:2022 Clauses 6.1.2, 8.2

  • Cybersecurity risk assessment

    Assess the product's cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risks and use the result across planning, design, development, production, delivery and maintenance. Document it, update it during the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years., base it on intended and foreseeable use, and include it in the technical documentation with a justification for any requirement that does not apply.

    CRA, Article 13(2) to (4)

  • Risks to the cardholder data environment are formally identified, evaluated, and managed

    Risks to the cardholder data environmentThe system components, people and processes that store, process or transmit cardholder data or sensitive authentication data, plus components with unrestricted connectivity to them. Defining the CDE sets the scope of a PCI DSS assessment. are formally identified, evaluated, and managed.

    PCI DSS, Requirement 12.3

Review, audit and improvement

Only CRA no specific requirement on the other side in the acts covered

NIST CSF 2.0 ID.IM, GV.OV · ISO/IEC 27001:2022 A.5.35, A.5.36, Clauses 9, 10

  • Correct non-conformity

    If you know or have reason to believe the product or your processes do not meet Annex I, immediately take corrective measures, or withdraw or recall the product as appropriate.

    CRA, Article 13(21)

  • EU declaration of conformity

    Once conformity is shown, draw up the EU declaration, following the Annex V structure, and supply it or a simplified version with the product. Use a single declaration where several Union acts apply. By drawing it up you assume responsibility for the product's compliance.

    CRA, Articles 13(12), (20), 28

  • Technical documentation

    Draw up technical documentation with at least the Annex VII elements before placing the product on the market and update it as needed, at least during the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years.. Keep it and the EU declaration available to the market surveillance authorities for at least 10 years after the product is placed on the market, or for the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer.

    CRA, Articles 13(13), 31(1), (2)

  • Choose a conformity route

    Assess the product and your processes against Annex I using internal control (module A), EU-type examination with conformity to type (modules B and C), full quality assurance (module H), or a European cybersecurity certification schemeA comprehensive set of requirements, technical requirements, standards and procedures set at EU level for the certification or conformity assessment of specific ICT products, services or processes. Schemes are adopted under the Cybersecurity Act, and NIS2 and the CRA can require their use. where available and applicable.

    CRA, Article 32(1)

  • Third-party assessment by product class

    Applies to: Manufacturers of important and critical products

    Important products in class I use modules B and C or module H unless harmonised standards, common specifications or a scheme at assurance level substantial were fully applied. Class II use modules B and C, module H or a scheme at that level. Critical products use a certification scheme under Article 8(1), or the class II procedures where its conditions are not met.

    CRA, Article 32(2) to (4)

Nothing in the acts covered.

Asset management

Both cover it read the wording below

NIST CSF 2.0 ID.AM · ISO/IEC 27001:2022 A.5.9 to A.5.13

  • Software bill of materials

    Identify and document vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and components, including a software bill of materialsA formal record of the details and supply chain relationships of the components included in the software of a product. Under the CRA, manufacturers must draw up an SBOM in a commonly used, machine-readable format covering at least the top-level dependencies. in a commonly used, machine-readable format covering at least the top-level dependencies.

    CRA, Annex I, Part II, point (1)

  • PCI DSS scope is documented and validated

    PCI DSSPayment Card Industry Data Security Standard scope is documented and validated.

    PCI DSS, Requirement 12.5

Protection

Access control

PCI DSS more detailed more requirements on this, not necessarily stricter

NIST CSF 2.0 PR.AA · ISO/IEC 27001:2022 A.5.15, A.5.18, A.8.2, A.8.3

  • Protect against unauthorised access

    Where applicable, protect against unauthorised access with appropriate controls such as authenticationThe process of checking that a user, device or software process is who or what it claims to be before allowing access to a system. A system may check evidence such as a password or a security credential. Authentication establishes identity; access requirements then determine what that identity may do. Multi-factor authentication is one approach to authentication, using more than one kind of evidence., identity or access management, and report possible unauthorised access.

    CRA, Annex I, Part I, point (2)(d)

  • Processes and mechanisms for restricting access to system components and cardholder data by business need to know are defined and understood

    Processes and mechanisms for restricting access to system components and cardholder dataUnder PCI DSS, the payment card data that must be protected: at a minimum the full primary account number, which may be accompanied by the cardholder name, expiration date or service code. Where cardholder data is stored, processed or transmitted defines the scope of a PCI DSS assessment. by business need to know are defined and understood.

    PCI DSS, Requirement 7.1

  • Access to system components and data is appropriately defined and assigned

    Access to system components and data is appropriately defined and assigned.

    PCI DSS, Requirement 7.2

  • Access to system components and data is managed via an access control system(s)

    Access to system components and data is managed via an access controlRequirements and safeguards that decide who or what may use information, systems or facilities, and what actions they may perform. Access control can grant or refuse access to people, software or devices. Examples include restricting a user account to permitted systems and limiting its privileges. In the plural, access controls are the measures used to enforce these requirements. system(s).

    PCI DSS, Requirement 7.3

  • User identification and related accounts for users and administrators are strictly managed throughout an account's lifecycle

    User identification and related accounts for users and administrators are strictly managed throughout an account's lifecycle.

    PCI DSS, Requirement 8.2

Authentication

PCI DSS more detailed more requirements on this, not necessarily stricter

NIST CSF 2.0 PR.AA · ISO/IEC 27001:2022 A.5.17, A.8.5

  • Protect against unauthorised access

    Where applicable, protect against unauthorised access with appropriate controls such as authenticationThe process of checking that a user, device or software process is who or what it claims to be before allowing access to a system. A system may check evidence such as a password or a security credential. Authentication establishes identity; access requirements then determine what that identity may do. Multi-factor authentication is one approach to authentication, using more than one kind of evidence., identity or access management, and report possible unauthorised access.

    CRA, Annex I, Part I, point (2)(d)

  • Processes and mechanisms for identifying users and authenticating access to system components are defined and understood

    Processes and mechanisms for identifying users and authenticating access to system components are defined and understood.

    PCI DSS, Requirement 8.1

  • Strong authentication for users and administrators is established and managed

    Strong authenticationThe process of checking that a user, device or software process is who or what it claims to be before allowing access to a system. A system may check evidence such as a password or a security credential. Authentication establishes identity; access requirements then determine what that identity may do. Multi-factor authentication is one approach to authentication, using more than one kind of evidence. for users and administrators is established and managed.

    PCI DSS, Requirement 8.3

  • Multi-factor authentication (MFA) is implemented to secure access into the CDE

    Multi-factor authenticationAuthentication through verification of at least two different types of factor: something a person knows, such as a password; something they have, such as a token; or something they are, such as a biometric. NIS2, PCI DSS, the NYDFS regulation and the FTC Safeguards Rule call for it. (MFA) is implemented to secure access into the CDECardholder Data Environment.

    PCI DSS, Requirement 8.4

  • Multi-factor authentication (MFA) systems are configured to prevent misuse

    Multi-factor authenticationAuthentication through verification of at least two different types of factor: something a person knows, such as a password; something they have, such as a token; or something they are, such as a biometric. NIS2, PCI DSS, the NYDFS regulation and the FTC Safeguards Rule call for it. (MFA) systems are configured to prevent misuse.

    PCI DSS, Requirement 8.5

  • Use of application and system accounts and associated authentication factors is strictly managed

    Use of application and system accounts and associated authenticationThe process of checking that a user, device or software process is who or what it claims to be before allowing access to a system. A system may check evidence such as a password or a security credential. Authentication establishes identity; access requirements then determine what that identity may do. Multi-factor authentication is one approach to authentication, using more than one kind of evidence. factors is strictly managed.

    PCI DSS, Requirement 8.6

Cryptography and encryption

PCI DSS more detailed more requirements on this, not necessarily stricter

NIST CSF 2.0 PR.DS · ISO/IEC 27001:2022 A.8.24

  • Confidentiality and integrity of data

    Where applicable, protect the confidentialityThe information-security property of keeping information from being disclosed to people, organisations or systems that are not authorised to receive it. Access restrictions and encryption help preserve confidentiality when information is stored, sent or processed. It concerns who can see information; it does not by itself ensure that the information is accurate or that a service remains available. of stored, transmitted or processed data, such as by state-of-the-art encryptionEncryption changes readable information into an unreadable form using a mathematical method and a key, a value that controls the transformation. Decryption recovers the original information with the appropriate key. Encryption helps keep stored or transmitted data confidential, so people without the necessary key cannot readily read it. at rest and in transit. Protect data, commands, programs and configuration against unauthorised change, and report corruption.

    CRA, Annex I, Part I, point (2)(e), (f)

  • Primary account number (PAN) is secured wherever it is stored

    Primary account numberThe unique payment card number that identifies the card issuer and the cardholder account, used on credit, debit and prepaid cards. Under PCI DSS the full PAN is the minimum element of cardholder data, so where it is stored, processed or transmitted drives the scope of an assessment. (PAN) is secured wherever it is stored.

    PCI DSS, Requirement 3.5

  • Cryptographic keys used to protect stored account data are secured

    Cryptographic keys used to protect stored account dataThe PCI DSS umbrella term for cardholder data, sensitive authentication data or both. PCI DSS requirements apply to every system component that stores, processes or transmits account data, or that could affect its security. are secured.

    PCI DSS, Requirement 3.6

  • Where cryptography is used to protect stored account data, key management processes and procedures covering all aspects of the key lifecycle are defined and implemented

    Where cryptographyThe use of mathematical methods to protect information and provide evidence that it can be trusted. Cryptography can hide information, detect changes and help verify where information came from. Encryption, which makes readable information unintelligible without the means to decrypt it, is one use of cryptography. The broader discipline also supports integrity checks and digital signatures. is used to protect stored account dataThe PCI DSS umbrella term for cardholder data, sensitive authentication data or both. PCI DSS requirements apply to every system component that stores, processes or transmits account data, or that could affect its security., key management processes and procedures covering all aspects of the key lifecycle are defined and implemented.

    PCI DSS, Requirement 3.7

Data security

PCI DSS more detailed more requirements on this, not necessarily stricter

NIST CSF 2.0 PR.DS · ISO/IEC 27001:2022 A.5.12, A.8.10 to A.8.12

  • Confidentiality and integrity of data

    Where applicable, protect the confidentialityThe information-security property of keeping information from being disclosed to people, organisations or systems that are not authorised to receive it. Access restrictions and encryption help preserve confidentiality when information is stored, sent or processed. It concerns who can see information; it does not by itself ensure that the information is accurate or that a service remains available. of stored, transmitted or processed data, such as by state-of-the-art encryptionEncryption changes readable information into an unreadable form using a mathematical method and a key, a value that controls the transformation. Decryption recovers the original information with the appropriate key. Encryption helps keep stored or transmitted data confidential, so people without the necessary key cannot readily read it. at rest and in transit. Protect data, commands, programs and configuration against unauthorised change, and report corruption.

    CRA, Annex I, Part I, point (2)(e), (f)

  • Minimise data and allow removal

    Where applicable, process only data that is adequate, relevant and limited to the product's purpose. Let users securely and easily remove all data and settings permanently, and make any transfer to other products secure.

    CRA, Annex I, Part I, point (2)(g), (m)

  • Processes and mechanisms for protecting stored account data are defined and understood

    Processes and mechanisms for protecting stored account dataThe PCI DSS umbrella term for cardholder data, sensitive authentication data or both. PCI DSS requirements apply to every system component that stores, processes or transmits account data, or that could affect its security. are defined and understood.

    PCI DSS, Requirement 3.1

  • Storage of account data is kept to a minimum

    Storage of account dataThe PCI DSS umbrella term for cardholder data, sensitive authentication data or both. PCI DSS requirements apply to every system component that stores, processes or transmits account data, or that could affect its security. is kept to a minimum.

    PCI DSS, Requirement 3.2

  • Sensitive authentication data (SAD) is not stored after authorization

    Sensitive authentication dataSecurity-related information used to authenticate cardholders or authorise payment card transactions, such as card verification codes, full track data, PINs and PIN blocks. Together with cardholder data it makes up account data under PCI DSS. (SAD) is not stored after authorization.

    PCI DSS, Requirement 3.3

  • Access to displays of full PAN and ability to copy PAN are restricted

    Access to displays of full PANPrimary Account Number and ability to copy PANPrimary Account Number are restricted.

    PCI DSS, Requirement 3.4

Network security

Only PCI DSS no specific requirement on the other side in the acts covered

NIST CSF 2.0 PR.IR · ISO/IEC 27001:2022 A.8.20 to A.8.22

Nothing in the acts covered.

  • Processes and mechanisms for installing and maintaining network security controls are defined and understood

    Processes and mechanisms for installing and maintaining network security controls are defined and understood.

    PCI DSS, Requirement 1.1

  • Network security controls (NSCs) are configured and maintained

    Network security controls (NSCs) are configured and maintained.

    PCI DSS, Requirement 1.2

  • Network access to and from the cardholder data environment is restricted

    Network access to and from the cardholder data environmentThe system components, people and processes that store, process or transmit cardholder data or sensitive authentication data, plus components with unrestricted connectivity to them. Defining the CDE sets the scope of a PCI DSS assessment. is restricted.

    PCI DSS, Requirement 1.3

  • Network connections between trusted and untrusted networks are controlled

    Network connections between trusted and untrusted networks are controlled.

    PCI DSS, Requirement 1.4

  • Risks to the CDE from computing devices that are able to connect to both untrusted networks and the CDE are mitigated

    Risks to the CDECardholder Data Environment from computing devices that are able to connect to both untrusted networks and the CDECardholder Data Environment are mitigated.

    PCI DSS, Requirement 1.5

  • Wireless environments are configured and managed securely

    Wireless environments are configured and managed securely.

    PCI DSS, Requirement 2.3

  • Wireless access points are identified and monitored, and unauthorized wireless access points are addressed

    Wireless access points are identified and monitored, and unauthorized wireless access points are addressed.

    PCI DSS, Requirement 11.2

Secure communications

Only PCI DSS no specific requirement on the other side in the acts covered

NIST CSF 2.0 PR.DS · ISO/IEC 27001:2022 A.5.14

Nothing in the acts covered.

  • Processes and mechanisms for protecting cardholder data with strong cryptography during transmission over open, public networks are defined and understood

    Processes and mechanisms for protecting cardholder dataUnder PCI DSS, the payment card data that must be protected: at a minimum the full primary account number, which may be accompanied by the cardholder name, expiration date or service code. Where cardholder data is stored, processed or transmitted defines the scope of a PCI DSS assessment. with strong cryptographyThe use of mathematical methods to protect information and provide evidence that it can be trusted. Cryptography can hide information, detect changes and help verify where information came from. Encryption, which makes readable information unintelligible without the means to decrypt it, is one use of cryptography. The broader discipline also supports integrity checks and digital signatures. during transmission over open, public networks are defined and understood.

    PCI DSS, Requirement 4.1

  • PAN is protected with strong cryptography during transmission

    PANPrimary Account Number is protected with strong cryptographyThe use of mathematical methods to protect information and provide evidence that it can be trusted. Cryptography can hide information, detect changes and help verify where information came from. Encryption, which makes readable information unintelligible without the means to decrypt it, is one use of cryptography. The broader discipline also supports integrity checks and digital signatures. during transmission.

    PCI DSS, Requirement 4.2

Secure acquisition and development

Both cover it read the wording below

NIST CSF 2.0 PR.PS · ISO/IEC 27001:2022 A.8.25 to A.8.31

  • Meet the essential requirements

    When placing a product on the market, ensure it was designed, developed and produced in line with the cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. requirements in Annex I, Part I.

    CRA, Article 13(1)

  • No known vulnerabilities, secure by default and reduced attack surface

    Where applicable on the basis of the risk assessmentA structured process for identifying risks, analysing their possible effects and judging which need attention. In information security, this means examining threats, weaknesses and existing safeguards to prioritise risks to information and business operations. The assessment informs decisions about reducing or accepting risk and should be reviewed as circumstances change., supply the product without known exploitable vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and with a secure-by-default configuration that can be reset. Limit attack surfaces and reduce the impact of incidents with exploitation mitigation.

    CRA, Annex I, Part I, point (2)(a), (b), (j), (k)

  • Processes and mechanisms for developing and maintaining secure systems and software are defined and understood

    Processes and mechanisms for developing and maintaining secure systems and software are defined and understood.

    PCI DSS, Requirement 6.1

  • Bespoke and custom software are developed securely

    Bespoke and custom software are developed securely.

    PCI DSS, Requirement 6.2

  • Public-facing web applications are protected against attacks

    Public-facing web applications are protected against attacks.

    PCI DSS, Requirement 6.4

Configuration, change and patch management

Both cover it read the wording below

NIST CSF 2.0 PR.PS · ISO/IEC 27001:2022 A.8.9, A.8.19, A.8.32

  • Keep security updates available

    Keep each security update issued during the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. available for at least 10 years after it is issued, or for the rest of the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer.

    CRA, Article 13(9)

  • Test, fix and disclose vulnerabilities

    Remediate vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without delay, with security updates separate from functional ones where feasible, distributed securely and free of charge unless agreed otherwise for tailor-made products. Test and review security regularly. Enforce a coordinated vulnerability disclosureA process in which someone who discovers a security weakness reports it to the system owner or product supplier and works with them to address it. The parties coordinate investigation, a fix and the timing and content of any public disclosure, reducing the chance of exposing users before protection is available. A national cybersecurity centre may help coordinate when several parties are involved or contact fails. policy, provide a reporting contact, and publish information on fixed vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition..

    CRA, Annex I, Part II, points (2) to (8)

  • Changes to all system components are managed securely

    Changes to all system components are managed securely.

    PCI DSS, Requirement 6.5

Vulnerability handling

Both cover it read the wording below

NIST CSF 2.0 ID.RA · ISO/IEC 27001:2022 A.8.8

  • Third-party components

    Exercise due diligence when integrating third-party components, including open-source ones, so they do not compromise the product. If you find a vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. in a component, report it to whoever makes or maintains the component and remediate it, sharing your fix where you developed one.

    CRA, Article 13(5), (6)

  • Set and state the support period

    Handle vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. effectively for a support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. that reflects expected use and is at least five years, or the expected use time if shorter. State the end date, at least month and year, clearly at the time of purchase, and notify users when support ends where technically feasible.

    CRA, Article 13(8), (19)

  • Report actively exploited vulnerabilities

    Notify any actively exploited vulnerabilityA vulnerability for which there is reliable evidence that a malicious actor has exploited it in a system without the owner's permission. Under the CRA, manufacturers must send an early warning within 24 hours of becoming aware of one in their product, through the single reporting platform. you become aware of to the coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity at the same time. Send an early warning within 24 hours and a vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. notification with general information and mitigations within 72 hours. Send a final report describing the vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition., any malicious actor and the fix no later than 14 days after a corrective or mitigating measure is available. The coordinating CSIRTComputer Security Incident Response Team may ask for an intermediate report.

    CRA, Article 14(1), (2), (6)

  • Importer corrective action and alerts

    Applies to: Importers

    Hold back non-conforming products and take corrective measures, withdraw or recall those already placed. Inform the manufacturer of any vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without undue delay, and where a product presents a significant cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risk, immediately inform the market surveillance authorities.

    CRA, Article 19(3), (5)

  • Distributor corrective action and alerts

    Applies to: Distributors

    Make sure corrective measures, withdrawal or recall take place for non-conforming products. Inform the manufacturer of any vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without undue delay. Immediately inform market surveillance authorities of a significant cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risk. If the manufacturer has ceased operations, inform the authorities without undue delay and, as far as possible, users.

    CRA, Article 20(4), (6)

  • Software bill of materials

    Identify and document vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and components, including a software bill of materialsA formal record of the details and supply chain relationships of the components included in the software of a product. Under the CRA, manufacturers must draw up an SBOM in a commonly used, machine-readable format covering at least the top-level dependencies. in a commonly used, machine-readable format covering at least the top-level dependencies.

    CRA, Annex I, Part II, point (1)

  • Test, fix and disclose vulnerabilities

    Remediate vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without delay, with security updates separate from functional ones where feasible, distributed securely and free of charge unless agreed otherwise for tailor-made products. Test and review security regularly. Enforce a coordinated vulnerability disclosureA process in which someone who discovers a security weakness reports it to the system owner or product supplier and works with them to address it. The parties coordinate investigation, a fix and the timing and content of any public disclosure, reducing the chance of exposing users before protection is available. A national cybersecurity centre may help coordinate when several parties are involved or contact fails. policy, provide a reporting contact, and publish information on fixed vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition..

    CRA, Annex I, Part II, points (2) to (8)

  • Processes and mechanisms for applying secure configurations to all system components are defined and understood

    Processes and mechanisms for applying secure configurations to all system components are defined and understood.

    PCI DSS, Requirement 2.1

  • System components are configured and managed securely

    System components are configured and managed securely.

    PCI DSS, Requirement 2.2

  • Security vulnerabilities are identified and addressed

    Security vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. are identified and addressed.

    PCI DSS, Requirement 6.3

  • External and internal vulnerabilities are regularly identified, prioritized, and addressed

    External and internal vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. are regularly identified, prioritized, and addressed.

    PCI DSS, Requirement 11.3

Human resources security

Only PCI DSS no specific requirement on the other side in the acts covered

NIST CSF 2.0 GV.RR · ISO/IEC 27001:2022 A.6.1 to A.6.6

Nothing in the acts covered.

  • Personnel are screened to reduce risks from insider threats

    Personnel are screened to reduce risks from insider threats.

    PCI DSS, Requirement 12.7

Physical and environmental security

Only PCI DSS no specific requirement on the other side in the acts covered

NIST CSF 2.0 PR.IR · ISO/IEC 27001:2022 A.7.1 to A.7.14

Nothing in the acts covered.

  • Processes and mechanisms for restricting physical access to cardholder data are defined and understood

    Processes and mechanisms for restricting physical access to cardholder dataUnder PCI DSS, the payment card data that must be protected: at a minimum the full primary account number, which may be accompanied by the cardholder name, expiration date or service code. Where cardholder data is stored, processed or transmitted defines the scope of a PCI DSS assessment. are defined and understood.

    PCI DSS, Requirement 9.1

  • Physical access controls manage entry into facilities and systems containing cardholder data

    Physical access controls manage entry into facilities and systems containing cardholder dataUnder PCI DSS, the payment card data that must be protected: at a minimum the full primary account number, which may be accompanied by the cardholder name, expiration date or service code. Where cardholder data is stored, processed or transmitted defines the scope of a PCI DSS assessment..

    PCI DSS, Requirement 9.2

  • Physical access for personnel and visitors is authorized and managed

    Physical access for personnel and visitors is authorized and managed.

    PCI DSS, Requirement 9.3

  • Media with cardholder data is securely stored, accessed, distributed, and destroyed

    Media with cardholder dataUnder PCI DSS, the payment card data that must be protected: at a minimum the full primary account number, which may be accompanied by the cardholder name, expiration date or service code. Where cardholder data is stored, processed or transmitted defines the scope of a PCI DSS assessment. is securely stored, accessed, distributed, and destroyed.

    PCI DSS, Requirement 9.4

  • Point-of-interaction (POI) devices are protected from tampering and unauthorized substitution

    Point-of-interaction (POI) devices are protected from tampering and unauthorized substitution.

    PCI DSS, Requirement 9.5

Detection and response

Monitoring and detection

PCI DSS more detailed more requirements on this, not necessarily stricter

NIST CSF 2.0 DE.CM, DE.AE · ISO/IEC 27001:2022 A.8.15, A.8.16

  • Record and monitor activity

    Where applicable, provide security-related information by recording and monitoring relevant internal activity, including access to or changes of data, services or functions, with a user opt-outAn opt-out is a way for a person to refuse an activity or stop further participation. In direct marketing, it means taking a step such as unsubscribing from messages. In a default-on arrangement, the activity proceeds unless the person refuses. Having an opt-out does not establish valid consent where the applicable law requires a positive agreement beforehand..

    CRA, Annex I, Part I, point (2)(l)

  • Processes and mechanisms for protecting all systems and networks from malicious software are defined and understood

    Processes and mechanisms for protecting all systems and networks from malicious softwareSoftware or firmware deliberately designed to harm a computer system or the information it holds. Malware can steal or destroy data, change information without permission, spy on activity or stop systems working. Examples include viruses, worms and spyware. Screening email or uploads for malware means looking for this harmful code before it can affect people or systems. are defined and understood.

    PCI DSS, Requirement 5.1

  • Malicious software (malware) is prevented, or detected and addressed

    Malicious software (malware) is prevented, or detected and addressed.

    PCI DSS, Requirement 5.2

  • Anti-malware mechanisms and processes are active, maintained, and monitored

    Anti-malwareSoftware designed to find malicious software, prevent it from infecting computers and, in some cases, remove an existing infection. Malicious software, or malware, includes programs such as viruses and spyware that can damage systems, steal information or disrupt operations. In security requirements, anti-malware refers to this protective capability rather than a particular product. mechanisms and processes are active, maintained, and monitored.

    PCI DSS, Requirement 5.3

  • Processes and mechanisms for logging and monitoring all access to system components and cardholder data are defined and understood

    Processes and mechanisms for logging and monitoring all access to system components and cardholder dataUnder PCI DSS, the payment card data that must be protected: at a minimum the full primary account number, which may be accompanied by the cardholder name, expiration date or service code. Where cardholder data is stored, processed or transmitted defines the scope of a PCI DSS assessment. are defined and understood.

    PCI DSS, Requirement 10.1

  • Audit logs are implemented to support the detection of anomalies and suspicious activity, and the forensic analysis of events

    Audit logs are implemented to support the detection of anomalies and suspicious activity, and the forensic analysis of events.

    PCI DSS, Requirement 10.2

  • Audit logs are protected from destruction and unauthorized modifications

    Audit logs are protected from destruction and unauthorized modifications.

    PCI DSS, Requirement 10.3

  • Audit logs are reviewed to identify anomalies or suspicious activity

    Audit logs are reviewed to identify anomalies or suspicious activity.

    PCI DSS, Requirement 10.4

  • Audit log history is retained and available for analysis

    Audit log history is retained and available for analysis.

    PCI DSS, Requirement 10.5

  • Time-synchronization mechanisms support consistent time settings across all systems

    Time-synchronization mechanisms support consistent time settings across all systems.

    PCI DSS, Requirement 10.6

  • Failures of critical security control systems are detected, reported, and responded to promptly

    Failures of critical security control systems are detected, reported, and responded to promptly.

    PCI DSS, Requirement 10.7

  • Network intrusions and unexpected file changes are detected and responded to

    Network intrusions and unexpected file changes are detected and responded to.

    PCI DSS, Requirement 11.5

  • Unauthorized changes on payment pages are detected and responded to

    Unauthorized changes on payment pages are detected and responded to.

    PCI DSS, Requirement 11.6

Incident handling

Only PCI DSS no specific requirement on the other side in the acts covered

NIST CSF 2.0 RS.MA, RS.AN, RS.MI · ISO/IEC 27001:2022 A.5.24 to A.5.28

Nothing in the acts covered.

  • Suspected and confirmed security incidents that could impact the CDE are responded to immediately

    Suspected and confirmed security incidents that could impact the CDECardholder Data Environment are responded to immediately.

    PCI DSS, Requirement 12.10

Incident classification

Only CRA no specific requirement on the other side in the acts covered

NIST CSF 2.0 RS.MA · ISO/IEC 27001:2022 A.5.25

  • When an incident is severe

    Treat an incident as severe if it harms or could harm the product's ability to protect the availabilityThe information-security property that authorised people and systems can access and use information or services when needed, reliably and within an acceptable time. An outage or an attack that overwhelms a service can reduce availability even if no information is stolen or changed. In product security, this includes keeping essential functions accessible and usable., authenticity, integrity or confidentialityThe information-security property of keeping information from being disclosed to people, organisations or systems that are not authorised to receive it. Access restrictions and encryption help preserve confidentiality when information is stored, sent or processed. It concerns who can see information; it does not by itself ensure that the information is accurate or that a service remains available. of sensitive or important data or functions, or if it has introduced or could introduce malicious code into the product or a user's systems.

    CRA, Article 14(5)

Nothing in the acts covered.

Reporting to authorities

Only CRA no specific requirement on the other side in the acts covered

NIST CSF 2.0 RS.CO · ISO/IEC 27001:2022 A.5.5

  • Report actively exploited vulnerabilities

    Notify any actively exploited vulnerabilityA vulnerability for which there is reliable evidence that a malicious actor has exploited it in a system without the owner's permission. Under the CRA, manufacturers must send an early warning within 24 hours of becoming aware of one in their product, through the single reporting platform. you become aware of to the coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity at the same time. Send an early warning within 24 hours and a vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. notification with general information and mitigations within 72 hours. Send a final report describing the vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition., any malicious actor and the fix no later than 14 days after a corrective or mitigating measure is available. The coordinating CSIRTComputer Security Incident Response Team may ask for an intermediate report.

    CRA, Article 14(1), (2), (6)

  • Report severe incidents

    Notify any severe incident affecting the product's security to the coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity at the same time. Send an early warning within 24 hours stating whether unlawful or malicious acts are suspected, and an incident notification with an initial assessment and mitigations within 72 hours. Send a final report with the root cause and measures within one month of the incident notification. The coordinating CSIRTComputer Security Incident Response Team may ask for an intermediate report.

    CRA, Article 14(3), (4), (6)

  • Reporting route

    Submit notifications through ENISAEuropean Union Agency for Cybersecurity's single reporting platform, using the end-point of the coordinating CSIRTComputer Security Incident Response Team in the Member State of your main establishment. Manufacturers without one follow the order in Article 14(7). You may ask for dissemination of a sensitive notification to be delayed on justified cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. grounds.

    CRA, Articles 14(7), 16(1), (2)

  • Voluntary reporting Optional

    Applies to: Manufacturers and any other natural or legal person

    Any person may voluntarily notify a coordinating CSIRTComputer Security Incident Response Team or ENISAEuropean Union Agency for Cybersecurity of vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition., cyber threatsAny potential circumstance, event or action that could damage, disrupt or otherwise harm network and information systems, their users or other persons. NIS2, DORA, the CRA, the Network Code on Cybersecurity and the Cyber Solidarity Act all use this Cybersecurity Act definition., incidents and near missesAn event that could have compromised the availability, authenticity, integrity or confidentiality of data or of services offered by network and information systems, but was prevented or did not materialise. NIS2 allows voluntary reporting of near misses, and the CRA uses the same definition.. Doing so creates no additional obligations for the person notifying.

    CRA, Article 15(1), (2), (5)

Nothing in the acts covered.

Informing customers and the public

Only CRA no specific requirement on the other side in the acts covered

NIST CSF 2.0 RS.CO, RC.CO

  • Set and state the support period

    Handle vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. effectively for a support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. that reflects expected use and is at least five years, or the expected use time if shorter. State the end date, at least month and year, clearly at the time of purchase, and notify users when support ends where technically feasible.

    CRA, Article 13(8), (19)

  • Product identity, contact point and instructions

    Give the product a type, batch or serial number and show your name and contact details. Designate a single point of contact for users that is not limited to automated tools. Supply the Annex II information and instructions and keep them available for at least 10 years or the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years., whichever is longer.

    CRA, Article 13(15) to (18)

  • Cooperate with authorities and announce cessation

    On a reasoned request, give the market surveillance authority the information needed to show conformity and cooperate on measures to remove risks. If you are ceasing operations and cannot comply, inform the authorities and, as far as possible, users before this takes effect.

    CRA, Article 13(22), (23)

  • Inform users

    After becoming aware of an actively exploited vulnerabilityA vulnerability for which there is reliable evidence that a malicious actor has exploited it in a system without the owner's permission. Under the CRA, manufacturers must send an early warning within 24 hours of becoming aware of one in their product, through the single reporting platform. or severe incident, inform impacted users, and where appropriate all users, and tell them about mitigations they can deploy, where appropriate in a structured, machine-readable format.

    CRA, Article 14(8)

Nothing in the acts covered.

Threat intelligence and information sharing

Only CRA no specific requirement on the other side in the acts covered

NIST CSF 2.0 ID.RA · ISO/IEC 27001:2022 A.5.6, A.5.7

  • Voluntary reporting Optional

    Applies to: Manufacturers and any other natural or legal person

    Any person may voluntarily notify a coordinating CSIRTComputer Security Incident Response Team or ENISAEuropean Union Agency for Cybersecurity of vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition., cyber threatsAny potential circumstance, event or action that could damage, disrupt or otherwise harm network and information systems, their users or other persons. NIS2, DORA, the CRA, the Network Code on Cybersecurity and the Cyber Solidarity Act all use this Cybersecurity Act definition., incidents and near missesAn event that could have compromised the availability, authenticity, integrity or confidentiality of data or of services offered by network and information systems, but was prevented or did not materialise. NIS2 allows voluntary reporting of near misses, and the CRA uses the same definition.. Doing so creates no additional obligations for the person notifying.

    CRA, Article 15(1), (2), (5)

Nothing in the acts covered.

Continuity and resilience

Business continuity and crisis management

Only CRA no specific requirement on the other side in the acts covered

NIST CSF 2.0 RC.RP, RC.CO · ISO/IEC 27001:2022 A.5.29, A.5.30

  • Availability of essential functions

    Where applicable, protect the availabilityThe information-security property that authorised people and systems can access and use information or services when needed, reliably and within an acceptable time. An outage or an attack that overwhelms a service can reduce availability even if no information is stolen or changed. In product security, this includes keeping essential functions accessible and usable. of essential and basic functions, also after an incident, including resilience against denial-of-service attacks. Minimise the product's negative impact on services provided by other devices or networks.

    CRA, Annex I, Part I, point (2)(h), (i)

Nothing in the acts covered.

Security testing

Both cover it read the wording below

NIST CSF 2.0 ID.IM · ISO/IEC 27001:2022 A.5.35, A.8.29, A.8.34

  • Test, fix and disclose vulnerabilities

    Remediate vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without delay, with security updates separate from functional ones where feasible, distributed securely and free of charge unless agreed otherwise for tailor-made products. Test and review security regularly. Enforce a coordinated vulnerability disclosureA process in which someone who discovers a security weakness reports it to the system owner or product supplier and works with them to address it. The parties coordinate investigation, a fix and the timing and content of any public disclosure, reducing the chance of exposing users before protection is available. A national cybersecurity centre may help coordinate when several parties are involved or contact fails. policy, provide a reporting contact, and publish information on fixed vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition..

    CRA, Annex I, Part II, points (2) to (8)

  • Processes and mechanisms for regularly testing security of systems and networks are defined and understood

    Processes and mechanisms for regularly testing security of systems and networks are defined and understood.

    PCI DSS, Requirement 11.1

  • External and internal penetration testing is regularly performed, and exploitable vulnerabilities and security weaknesses are corrected

    External and internal penetration testingA security assessment in which authorised testers simulate attacks on an application, system or network to find weaknesses that could actually be exploited. Testing takes place within agreed limits, such as the systems included and the techniques permitted. It can reveal how several weaknesses combine to give an attacker greater access, helping an organisation understand and correct the resulting exposure. is regularly performed, and exploitable vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and security weaknesses are corrected.

    PCI DSS, Requirement 11.4

Third parties and supply chain

Supplier and third-party risk

CRA more detailed more requirements on this, not necessarily stricter

NIST CSF 2.0 GV.SC · ISO/IEC 27001:2022 A.5.19, A.5.21 to A.5.23

  • Third-party components

    Exercise due diligence when integrating third-party components, including open-source ones, so they do not compromise the product. If you find a vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. in a component, report it to whoever makes or maintains the component and remediate it, sharing your fix where you developed one.

    CRA, Article 13(5), (6)

  • Importer checks

    Applies to: Importers

    Place on the market only products and manufacturer processes that meet Annex I. First ensure the conformity assessmentThe process of verifying whether a product, service or system meets the requirements set by the applicable EU act, for example the essential cybersecurity requirements of the CRA or the high-risk requirements of the AI Act. Depending on the risk class, the manufacturer does it alone or with a notified body. and technical documentation exist, the product has CE markingA marking by which a manufacturer or provider indicates that a product conforms to the applicable EU harmonisation legislation. Under the AI Act, high-risk AI systems must bear the CE marking, and the same mechanism applies under other product laws., EU declaration and instructions, and the identification and support-date duties are met. Show your own contact details on the product, its packaging or an accompanying document.

    CRA, Article 19(1), (2), (4)

  • Distributor checks and cooperation

    Applies to: Distributors

    Act with due care. Before making a product available, verify the CE markingA marking by which a manufacturer or provider indicates that a product conforms to the applicable EU harmonisation legislation. Under the AI Act, high-risk AI systems must bear the CE marking, and the same mechanism applies under other product laws. and that the manufacturer and importer met their identification, instruction, support-date and declaration duties. Hold back non-conforming products and cooperate with the authority on reasoned request.

    CRA, Article 20(1), (2), (3), (5)

  • Software bill of materials

    Identify and document vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and components, including a software bill of materialsA formal record of the details and supply chain relationships of the components included in the software of a product. Under the CRA, manufacturers must draw up an SBOM in a commonly used, machine-readable format covering at least the top-level dependencies. in a commonly used, machine-readable format covering at least the top-level dependencies.

    CRA, Annex I, Part II, point (1)

  • Risk to information assets associated with third-party service provider (TPSP) relationships is managed

    Risk to information assets associated with third-party service provider (TPSP) relationships is managed.

    PCI DSS, Requirement 12.8

  • Third-party service providers (TPSPs) support their customers' PCI DSS compliance

    Third-party service providers (TPSPs) support their customers' PCI DSSPayment Card Industry Data Security Standard compliance.

    PCI DSS, Requirement 12.9

Privacy and data protection

Privacy by design and by default

Only CRA no specific requirement on the other side in the acts covered

NIST Privacy Framework CT.DP-P

  • Minimise data and allow removal

    Where applicable, process only data that is adequate, relevant and limited to the product's purpose. Let users securely and easily remove all data and settings permanently, and make any transfer to other products secure.

    CRA, Annex I, Part I, point (2)(g), (m)

Nothing in the acts covered.

Supervision and enforcement

Cooperation with supervisors

Only CRA no specific requirement on the other side in the acts covered

  • Cooperate with authorities and announce cessation

    On a reasoned request, give the market surveillance authority the information needed to show conformity and cooperate on measures to remove risks. If you are ceasing operations and cannot comply, inform the authorities and, as far as possible, users before this takes effect.

    CRA, Article 13(22), (23)

  • Importer corrective action and alerts

    Applies to: Importers

    Hold back non-conforming products and take corrective measures, withdraw or recall those already placed. Inform the manufacturer of any vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without undue delay, and where a product presents a significant cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risk, immediately inform the market surveillance authorities.

    CRA, Article 19(3), (5)

  • Importer records and cooperation

    Applies to: Importers

    Keep the EU declaration of conformity for at least 10 years after the product is placed on the market, or for the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer, and ensure the technical documentation can be made available on request. Provide information to the authority on reasoned request and cooperate. If the manufacturer has ceased operations, inform the authorities and, where possible, users.

    CRA, Article 19(6) to (8)

  • Distributor checks and cooperation

    Applies to: Distributors

    Act with due care. Before making a product available, verify the CE markingA marking by which a manufacturer or provider indicates that a product conforms to the applicable EU harmonisation legislation. Under the AI Act, high-risk AI systems must bear the CE marking, and the same mechanism applies under other product laws. and that the manufacturer and importer met their identification, instruction, support-date and declaration duties. Hold back non-conforming products and cooperate with the authority on reasoned request.

    CRA, Article 20(1), (2), (3), (5)

  • Distributor corrective action and alerts

    Applies to: Distributors

    Make sure corrective measures, withdrawal or recall take place for non-conforming products. Inform the manufacturer of any vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without undue delay. Immediately inform market surveillance authorities of a significant cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risk. If the manufacturer has ceased operations, inform the authorities without undue delay and, as far as possible, users.

    CRA, Article 20(4), (6)

  • Technical documentation

    Draw up technical documentation with at least the Annex VII elements before placing the product on the market and update it as needed, at least during the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years.. Keep it and the EU declaration available to the market surveillance authorities for at least 10 years after the product is placed on the market, or for the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer.

    CRA, Articles 13(13), 31(1), (2)

  • Fines for misleading information

    Applies to: Economic operators

    Supplying incorrect, incomplete or misleading information to notified bodiesA conformity assessment body that a Member State has notified to the Commission as competent to carry out third-party assessment under EU legislation. Whether a manufacturer or provider must involve one depends on the applicable act, system or product classification and conformity assessment route; not every high-risk AI system requires a notified body. and market surveillance authorities in reply to a request carries fines of up to EUR 5 million or 1% of total worldwide annual turnover, whichever is higher.

    CRA, Article 64(4)

Nothing in the acts covered.

Penalties and liability

Only CRA no specific requirement on the other side in the acts covered

  • Fines for essential requirements and reporting

    Applies to: Manufacturers

    Breach of Annex I or of Articles 13 and 14 carries fines of up to EUR 15 million or 2.5% of total worldwide annual turnover, whichever is higher. Micro and small enterprises are not fined for missing the 24-hour early warning, and open-source software stewardsA legal person, other than a manufacturer, that systematically provides sustained support for the development of free and open-source software intended for commercial activities and ensures its viability, such as a foundation. The CRA gives stewards a lighter regime instead of full manufacturer obligations. are not fined for any infringement.

    CRA, Article 64(2), (10)

  • Fines for other operator obligations

    Applies to: Economic operators and others subject to the listed articles

    Breach of Articles 18 to 23, 28, 30(1) to (4), 31(1) to (4), 32(1) to (3), 33(5) and certain other listed articles carries fines of up to EUR 10 million or 2% of total worldwide annual turnover, whichever is higher.

    CRA, Article 64(3)

  • Fines for misleading information

    Applies to: Economic operators

    Supplying incorrect, incomplete or misleading information to notified bodiesA conformity assessment body that a Member State has notified to the Commission as competent to carry out third-party assessment under EU legislation. Whether a manufacturer or provider must involve one depends on the applicable act, system or product classification and conformity assessment route; not every high-risk AI system requires a notified body. and market surveillance authorities in reply to a request carries fines of up to EUR 5 million or 1% of total worldwide annual turnover, whichever is higher.

    CRA, Article 64(4)

Nothing in the acts covered.

Requirements are summarised in plain words; the official text prevails. Verdicts compare what the acts covered state, not how a supervisor applies them. Most topics are cross-referenced to NIST CSF 2.0 and ISO/IEC 27001:2022.

More Comparisons

Subject to more than one?

We run one control set for both, without doing the work twice. Ask what that saves you.

Loading the form…