CRA vs Swift CSP
Where they overlap, where they differ and which asks more, topic by topic, with their deadlines and fines side by side.
At a Glance
They differ on 26 of 28 topics. Each verdict names what it rests on; read the wording before relying on it.
- CRA Asks more on 3 topics Alone on 13 topics More detailed on 1 topic
- Swift CSP Asks more on 0 topics Alone on 6 topics More detailed on 3 topics
| Topic | CRA | Swift CSP | Verdict |
|---|---|---|---|
| Governance | |||
| Roles and independence | CRA: 1 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Awareness and training | CRA: – | Swift CSP: 1 | Only Swift CSPno specific requirement on the other side in the acts covered |
| Risk management | |||
| Risk assessment | CRA: 1 | Swift CSP: 1 | CRA asks morebinding, where the other is optional |
| Review, audit and improvement | CRA: 5 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Asset management | CRA: 1 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Protection | |||
| Access control | CRA: 1 | Swift CSP: 2 | Both cover itread the wording below |
| Authentication | CRA: 1 | Swift CSP: 4 | Swift CSP more detailedmore requirements on this, not necessarily stricter |
| Cryptography and encryption | CRA: 1 | Swift CSP: 1 | CRA asks morebinding, where the other is optional |
| Data security | CRA: 2 | Swift CSP: 4 | Swift CSP more detailedmore requirements on this, not necessarily stricter |
| Network security | CRA: – | Swift CSP: 4 | Only Swift CSPno specific requirement on the other side in the acts covered |
| Secure communications | CRA: – | Swift CSP: 3 | Only Swift CSPno specific requirement on the other side in the acts covered |
| Secure acquisition and development | CRA: 2 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Configuration, change and patch management | CRA: 2 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Vulnerability handling | CRA: 7 | Swift CSP: 4 | Both cover itread the wording below |
| Human resources security | CRA: – | Swift CSP: 1 | Only Swift CSPno specific requirement on the other side in the acts covered |
| Physical and environmental security | CRA: – | Swift CSP: 1 | Only Swift CSPno specific requirement on the other side in the acts covered |
| Detection and response | |||
| Monitoring and detection | CRA: 1 | Swift CSP: 3 | Swift CSP more detailedmore requirements on this, not necessarily stricter |
| Incident handling | CRA: – | Swift CSP: 1 | Only Swift CSPno specific requirement on the other side in the acts covered |
| Incident classification | CRA: 1 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Reporting to authorities | CRA: 4 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Informing customers and the public | CRA: 4 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Threat intelligence and information sharing | CRA: 1 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Continuity and resilience | |||
| Business continuity and crisis management | CRA: 1 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Security testing | CRA: 1 | Swift CSP: 1 | CRA asks morebinding, where the other is optional |
| Third parties and supply chain | |||
| Supplier and third-party risk | CRA: 4 | Swift CSP: 1 | CRA more detailedmore requirements on this, not necessarily stricter |
| Privacy and data protection | |||
| Privacy by design and by default | CRA: 1 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Supervision and enforcement | |||
| Cooperation with supervisors | CRA: 7 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
| Penalties and liability | CRA: 3 | Swift CSP: – | Only CRAno specific requirement on the other side in the acts covered |
What This Covers
The obligations below are summarised from the acts listed here, grouped by topic. Where a side shows nothing on a topic, the acts covered have no specific requirement on it; an act not yet included, national guidance or a supervisor's expectations may still say more. Use it to see where the regimes differ, not as a compliance checklist.
Included
- CRA Regulation (EU) 2024/2847 of the European Parliament and of the Council of 23 October 2024
- CRA Product Categories Commission Implementing Regulation (EU) 2025/2392 of 28 November 2025 on the technical description of the categories of important and critical products with digital elements pursuant to Regulation (EU) 2024/2847 of the European Parliament and of the Council (OJ L, 2025/2392, 1.12.2025)
- Kamerstuk 36875 Kamerstukken 36875, Regels ter uitvoering van Verordening (EU) 2024/2847 (Uitvoeringswet verordening cyberweerbaarheid), voorstel van wet (36875, nr. 2) and memorie van toelichting (36875, nr. 3)
- S.L. 591.06 L.N. 238 of 2026, Cyber Resilience Regulations, 2026, made under article 58 of the Malta Digital Innovation Authority Act (Cap. 591); Government Gazette No. 21,717, 11 September 2026; S.L. 591.06
Status
Reviewed against the official texts.
Included
- Swift CSP Swift Customer Security Controls Framework v2026 (CSCF v2026)
Status
Reviewed against the official texts.
Key Numbers
Deadline
CRA: Final report within 14 days of a corrective or mitigating measure being available
Swift CSP: Not in the acts covered
Threshold
CRA: Harm to protection of sensitive or important data or functions, or malicious code
Swift CSP: Not in the acts covered
Goes to
CRA: Manufacturer and market surveillance authorities (Importers); Manufacturer and market surveillance authorities (Distributors)
Swift CSP: Not in the acts covered
Evidence to keep
CRA: Documented risk assessmentA structured process for identifying risks, analysing their possible effects and judging which need attention. In information security, this means examining threats, weaknesses and existing safeguards to prioritise risks to information and business operations. The assessment informs decisions about reducing or accepting risk and should be reviewed as circumstances change. in the technical documentation; EU declaration of conformity, at least 10 years or the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer (Importers); Technical documentation and EU declaration, at least 10 years or the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer; Software bill of materialsA formal record of the details and supply chain relationships of the components included in the software of a product. Under the CRA, manufacturers must draw up an SBOM in a commonly used, machine-readable format covering at least the top-level dependencies.
Swift CSP: Not in the acts covered
Incident reports go to
CRA: Coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity, via the single reporting platform; Coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity, via the single reporting platform; Coordinating CSIRTComputer Security Incident Response Team of the main establishment and ENISAEuropean Union Agency for Cybersecurity
Swift CSP: Not in the acts covered
First notice of an incident
CRA: Within 24 hours of becoming aware; Within 24 hours of becoming aware
Swift CSP: Not in the acts covered
Incident notification
CRA: Within 72 hours of becoming aware; Within 72 hours of becoming aware
Swift CSP: Not in the acts covered
Intermediate report
CRA: On request of the coordinating CSIRTComputer Security Incident Response Team; On request of the coordinating CSIRTComputer Security Incident Response Team
Swift CSP: Not in the acts covered
Final report
CRA: Within one month of the incident notification
Swift CSP: Not in the acts covered
External assessment or certification
CRA: Module A, modules B and C, module H, or an EU certification scheme; Third-party assessment or certification, depending on class (Manufacturers of important and critical products)
Swift CSP: Not in the acts covered
Maximum fines
CRA: Up to EUR 15,000,000 or 2.5% of worldwide annual turnover, whichever is higher (Manufacturers); Up to EUR 10,000,000 or 2% of worldwide annual turnover, whichever is higher (Economic operators and others subject to the listed articles); Up to EUR 5,000,000 or 1% of worldwide annual turnover, whichever is higher (Economic operators)
Swift CSP: Not in the acts covered
Governance
Roles and independence
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 GV.RR · ISO/IEC 27001:2022 A.5.2, A.5.3
When others become the manufacturer
Applies to: Importers and distributors who sell a product under their own name or trademark or substantially modify it, and others who substantially modify a product
An importer or distributor that sells a product under its own name or trademark, or substantially modifies it, is treated as the manufacturer and is subject to Articles 13 and 14. Any other person who substantially modifies a product and makes it available is also a manufacturer, for the affected part or the whole product if its overall cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. is affected.
Nothing in the acts covered.
Awareness and training
Only Swift CSP no specific requirement on the other side in the acts covered
NIST CSF 2.0 PR.AT · ISO/IEC 27001:2022 A.6.3
Nothing in the acts covered.
Security Training and Awareness
Applies to: All types
Train staff with access to SwiftSociety for Worldwide Interbank Financial Telecommunication on security, including role-specific training for privileged users.
Risk management
Risk assessment
CRA asks more binding, where the other is optional
NIST CSF 2.0 ID.RA · ISO/IEC 27001:2022 Clauses 6.1.2, 8.2
Cybersecurity risk assessment
Assess the product's cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risks and use the result across planning, design, development, production, delivery and maintenance. Document it, update it during the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years., base it on intended and foreseeable use, and include it in the technical documentation with a justification for any requirement that does not apply.
Scenario-based Risk Assessment (advisory) Recommended
Applies to: All types (advisory)
Assess the risk of SwiftSociety for Worldwide Interbank Financial Telecommunication-related attack scenarios regularly.
Review, audit and improvement
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 ID.IM, GV.OV · ISO/IEC 27001:2022 A.5.35, A.5.36, Clauses 9, 10
Correct non-conformity
If you know or have reason to believe the product or your processes do not meet Annex I, immediately take corrective measures, or withdraw or recall the product as appropriate.
EU declaration of conformity
Once conformity is shown, draw up the EU declaration, following the Annex V structure, and supply it or a simplified version with the product. Use a single declaration where several Union acts apply. By drawing it up you assume responsibility for the product's compliance.
Technical documentation
Draw up technical documentation with at least the Annex VII elements before placing the product on the market and update it as needed, at least during the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years.. Keep it and the EU declaration available to the market surveillance authorities for at least 10 years after the product is placed on the market, or for the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer.
Choose a conformity route
Assess the product and your processes against Annex I using internal control (module A), EU-type examination with conformity to type (modules B and C), full quality assurance (module H), or a European cybersecurity certification schemeA comprehensive set of requirements, technical requirements, standards and procedures set at EU level for the certification or conformity assessment of specific ICT products, services or processes. Schemes are adopted under the Cybersecurity Act, and NIS2 and the CRA can require their use. where available and applicable.
Third-party assessment by product class
Applies to: Manufacturers of important and critical products
Important products in class I use modules B and C or module H unless harmonised standards, common specifications or a scheme at assurance level substantial were fully applied. Class II use modules B and C, module H or a scheme at that level. Critical products use a certification scheme under Article 8(1), or the class II procedures where its conditions are not met.
Nothing in the acts covered.
Asset management
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 ID.AM · ISO/IEC 27001:2022 A.5.9 to A.5.13
Software bill of materials
Identify and document vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and components, including a software bill of materialsA formal record of the details and supply chain relationships of the components included in the software of a product. Under the CRA, manufacturers must draw up an SBOM in a commonly used, machine-readable format covering at least the top-level dependencies. in a commonly used, machine-readable format covering at least the top-level dependencies.
Nothing in the acts covered.
Protection
Access control
Both cover it read the wording below
NIST CSF 2.0 PR.AA · ISO/IEC 27001:2022 A.5.15, A.5.18, A.8.2, A.8.3
Protect against unauthorised access
Where applicable, protect against unauthorised access with appropriate controls such as authenticationThe process of checking that a user, device or software process is who or what it claims to be before allowing access to a system. A system may check evidence such as a password or a security credential. Authentication establishes identity; access requirements then determine what that identity may do. Multi-factor authentication is one approach to authentication, using more than one kind of evidence., identity or access management, and report possible unauthorised access.
Operating System Privileged Account Control
Applies to: A1, A2, A3, A4; advisory for B
Restrict and control the use of administrator accounts on the operating systems of in-scope components.
Logical Access Control
Applies to: All types
Grant access on need-to-know, least privilegeThe principle that a security architecture gives each user, process or other entity only the system authorisations and resources it needs to perform its function. It limits the damage a compromised account or component can do. and segregation of duties, and review it regularly.
Authentication
Swift CSP more detailed more requirements on this, not necessarily stricter
NIST CSF 2.0 PR.AA · ISO/IEC 27001:2022 A.5.17, A.8.5
Protect against unauthorised access
Where applicable, protect against unauthorised access with appropriate controls such as authenticationThe process of checking that a user, device or software process is who or what it claims to be before allowing access to a system. A system may check evidence such as a password or a security credential. Authentication establishes identity; access requirements then determine what that identity may do. Multi-factor authentication is one approach to authentication, using more than one kind of evidence., identity or access management, and report possible unauthorised access.
Password Policy
Applies to: All types
Make passwords resistant to common attacks through an enforced password policy.
Multi-Factor Authentication
Applies to: All types
Require multi-factor authenticationAuthentication through verification of at least two different types of factor: something a person knows, such as a password; something they have, such as a token; or something they are, such as a biometric. NIS2, PCI DSS, the NYDFS regulation and the FTC Safeguards Rule call for it. for interactive access to SwiftSociety for Worldwide Interbank Financial Telecommunication-related applications and operating system administration.
Token Management
Applies to: All types
Manage hardware authenticationThe process of checking that a user, device or software process is who or what it claims to be before allowing access to a system. A system may check evidence such as a password or a security credential. Authentication establishes identity; access requirements then determine what that identity may do. Multi-factor authentication is one approach to authentication, using more than one kind of evidence. tokens and keep them under the control of their owners.
Password Repository Protection
Applies to: All types
Protect stored passwords, physical and logical, against disclosure.
Cryptography and encryption
CRA asks more binding, where the other is optional
NIST CSF 2.0 PR.DS · ISO/IEC 27001:2022 A.8.24
Confidentiality and integrity of data
Where applicable, protect the confidentialityThe information-security property of keeping information from being disclosed to people, organisations or systems that are not authorised to receive it. Access restrictions and encryption help preserve confidentiality when information is stored, sent or processed. It concerns who can see information; it does not by itself ensure that the information is accurate or that a service remains available. of stored, transmitted or processed data, such as by state-of-the-art encryptionEncryption changes readable information into an unreadable form using a mathematical method and a key, a value that controls the transformation. Decryption recovers the original information with the appropriate key. Encryption helps keep stored or transmitted data confidential, so people without the necessary key cannot readily read it. at rest and in transit. Protect data, commands, programs and configuration against unauthorised change, and report corruption.
External Transmission Data Protection (advisory) Recommended
Applies to: A1, A2, A3, A4 (advisory)
Protect SwiftSociety for Worldwide Interbank Financial Telecommunication-related data sent or stored outside the secure zone, such as back-ups or files moved to other sites.
Data security
Swift CSP more detailed more requirements on this, not necessarily stricter
NIST CSF 2.0 PR.DS · ISO/IEC 27001:2022 A.5.12, A.8.10 to A.8.12
Confidentiality and integrity of data
Where applicable, protect the confidentialityThe information-security property of keeping information from being disclosed to people, organisations or systems that are not authorised to receive it. Access restrictions and encryption help preserve confidentiality when information is stored, sent or processed. It concerns who can see information; it does not by itself ensure that the information is accurate or that a service remains available. of stored, transmitted or processed data, such as by state-of-the-art encryptionEncryption changes readable information into an unreadable form using a mathematical method and a key, a value that controls the transformation. Decryption recovers the original information with the appropriate key. Encryption helps keep stored or transmitted data confidential, so people without the necessary key cannot readily read it. at rest and in transit. Protect data, commands, programs and configuration against unauthorised change, and report corruption.
Minimise data and allow removal
Where applicable, process only data that is adequate, relevant and limited to the product's purpose. Let users securely and easily remove all data and settings permanently, and make any transfer to other products secure.
Transaction Business Controls
Applies to: All types
Restrict transaction activity to what is expected for your business, such as hours, counterparties and value limits, and detect deviations.
RMA Business Controls (advisory) Recommended
Applies to: All types (advisory)
Review Relationship Management Application relationships regularly and remove those no longer needed.
Software Integrity
Applies to: A1, A2, A3; advisory for A4
Check the integrity of the SwiftSociety for Worldwide Interbank Financial Telecommunication-related software you run.
Database Integrity
Applies to: A1, A2; advisory for A4
Check the integrity of the database records of the messaging interface.
Network security
Only Swift CSP no specific requirement on the other side in the acts covered
NIST CSF 2.0 PR.IR · ISO/IEC 27001:2022 A.8.20 to A.8.22
Nothing in the acts covered.
Swift Environment Protection
Applies to: A1, A2, A3
Place the SwiftSociety for Worldwide Interbank Financial Telecommunication infrastructure in a secure zone, separated from the general ITInformation Technology environment, with controlled access into and out of it.
Virtualisation or Cloud Platform Protection
Applies to: A1, A2, A3, A4; advisory for B
Secure the virtualisation or cloud platform that hosts in-scope components to the same level as the components themselves.
Restriction of Internet Access
Applies to: All types
Limit internet access from operator PCs and in-scope systems to what is needed, and control it.
Customer Environment Protection
Applies to: A4
For users with a customer connector, protect that environment in a dedicated, separated zone.
Secure communications
Only Swift CSP no specific requirement on the other side in the acts covered
NIST CSF 2.0 PR.DS · ISO/IEC 27001:2022 A.5.14
Nothing in the acts covered.
Internal Data Flow Security
Applies to: A1, A2, A3
Protect the confidentialityThe information-security property of keeping information from being disclosed to people, organisations or systems that are not authorised to receive it. Access restrictions and encryption help preserve confidentiality when information is stored, sent or processed. It concerns who can see information; it does not by itself ensure that the information is accurate or that a service remains available., integrity and authenticity of data flows between SwiftSociety for Worldwide Interbank Financial Telecommunication-related components.
Back Office Data Flow Security
Applies to: A1, A2, A3, A4
Protect data flows between the back office and the secure zone, starting with bridging servers. Mandatory since v2026; legacy direct flows tentatively from 2028.
Operator Session Confidentiality and Integrity
Applies to: All types
Protect interactive operator sessions to SwiftSociety for Worldwide Interbank Financial Telecommunication-related applications against eavesdropping and tampering.
Secure acquisition and development
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 PR.PS · ISO/IEC 27001:2022 A.8.25 to A.8.31
Meet the essential requirements
When placing a product on the market, ensure it was designed, developed and produced in line with the cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. requirements in Annex I, Part I.
No known vulnerabilities, secure by default and reduced attack surface
Where applicable on the basis of the risk assessmentA structured process for identifying risks, analysing their possible effects and judging which need attention. In information security, this means examining threats, weaknesses and existing safeguards to prioritise risks to information and business operations. The assessment informs decisions about reducing or accepting risk and should be reviewed as circumstances change., supply the product without known exploitable vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and with a secure-by-default configuration that can be reset. Limit attack surfaces and reduce the impact of incidents with exploitation mitigation.
Nothing in the acts covered.
Configuration, change and patch management
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 PR.PS · ISO/IEC 27001:2022 A.8.9, A.8.19, A.8.32
Keep security updates available
Keep each security update issued during the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. available for at least 10 years after it is issued, or for the rest of the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer.
Test, fix and disclose vulnerabilities
Remediate vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without delay, with security updates separate from functional ones where feasible, distributed securely and free of charge unless agreed otherwise for tailor-made products. Test and review security regularly. Enforce a coordinated vulnerability disclosureA process in which someone who discovers a security weakness reports it to the system owner or product supplier and works with them to address it. The parties coordinate investigation, a fix and the timing and content of any public disclosure, reducing the chance of exposing users before protection is available. A national cybersecurity centre may help coordinate when several parties are involved or contact fails. policy, provide a reporting contact, and publish information on fixed vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition..
Nothing in the acts covered.
Vulnerability handling
Both cover it read the wording below
NIST CSF 2.0 ID.RA · ISO/IEC 27001:2022 A.8.8
Third-party components
Exercise due diligence when integrating third-party components, including open-source ones, so they do not compromise the product. If you find a vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. in a component, report it to whoever makes or maintains the component and remediate it, sharing your fix where you developed one.
Set and state the support period
Handle vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. effectively for a support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. that reflects expected use and is at least five years, or the expected use time if shorter. State the end date, at least month and year, clearly at the time of purchase, and notify users when support ends where technically feasible.
Report actively exploited vulnerabilities
Notify any actively exploited vulnerabilityA vulnerability for which there is reliable evidence that a malicious actor has exploited it in a system without the owner's permission. Under the CRA, manufacturers must send an early warning within 24 hours of becoming aware of one in their product, through the single reporting platform. you become aware of to the coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity at the same time. Send an early warning within 24 hours and a vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. notification with general information and mitigations within 72 hours. Send a final report describing the vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition., any malicious actor and the fix no later than 14 days after a corrective or mitigating measure is available. The coordinating CSIRTComputer Security Incident Response Team may ask for an intermediate report.
Importer corrective action and alerts
Applies to: Importers
Hold back non-conforming products and take corrective measures, withdraw or recall those already placed. Inform the manufacturer of any vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without undue delay, and where a product presents a significant cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risk, immediately inform the market surveillance authorities.
Distributor corrective action and alerts
Applies to: Distributors
Make sure corrective measures, withdrawal or recall take place for non-conforming products. Inform the manufacturer of any vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without undue delay. Immediately inform market surveillance authorities of a significant cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risk. If the manufacturer has ceased operations, inform the authorities without undue delay and, as far as possible, users.
Software bill of materials
Identify and document vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and components, including a software bill of materialsA formal record of the details and supply chain relationships of the components included in the software of a product. Under the CRA, manufacturers must draw up an SBOM in a commonly used, machine-readable format covering at least the top-level dependencies. in a commonly used, machine-readable format covering at least the top-level dependencies.
Test, fix and disclose vulnerabilities
Remediate vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without delay, with security updates separate from functional ones where feasible, distributed securely and free of charge unless agreed otherwise for tailor-made products. Test and review security regularly. Enforce a coordinated vulnerability disclosureA process in which someone who discovers a security weakness reports it to the system owner or product supplier and works with them to address it. The parties coordinate investigation, a fix and the timing and content of any public disclosure, reducing the chance of exposing users before protection is available. A national cybersecurity centre may help coordinate when several parties are involved or contact fails. policy, provide a reporting contact, and publish information on fixed vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition..
Security Updates
Applies to: All types
Install vendor security updates on in-scope hardware and software within a risk-based time frame.
System Hardening
Applies to: All types
Harden operating systems, databases and network devices of the SwiftSociety for Worldwide Interbank Financial Telecommunication environment against attack.
Vulnerability Scanning
Applies to: A1, A2, A3, A4; advisory for B
Scan in-scope components for vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and act on the results.
Application Hardening
Applies to: A1, A2, A3
Harden the SwiftSociety for Worldwide Interbank Financial Telecommunication messaging and communication interfaces and related applications.
Human resources security
Only Swift CSP no specific requirement on the other side in the acts covered
NIST CSF 2.0 GV.RR · ISO/IEC 27001:2022 A.6.1 to A.6.6
Nothing in the acts covered.
Staff Screening Process (advisory) Recommended
Applies to: All types (advisory)
Screen staff who operate or administer the SwiftSociety for Worldwide Interbank Financial Telecommunication environment before and during employment, where local law allows.
Physical and environmental security
Only Swift CSP no specific requirement on the other side in the acts covered
NIST CSF 2.0 PR.IR · ISO/IEC 27001:2022 A.7.1 to A.7.14
Nothing in the acts covered.
Physical Security
Applies to: All types
Prevent unauthorised physical access to sensitive equipment, workplaces, tokens and storage media.
Detection and response
Monitoring and detection
Swift CSP more detailed more requirements on this, not necessarily stricter
NIST CSF 2.0 DE.CM, DE.AE · ISO/IEC 27001:2022 A.8.15, A.8.16
Record and monitor activity
Where applicable, provide security-related information by recording and monitoring relevant internal activity, including access to or changes of data, services or functions, with a user opt-outAn opt-out is a way for a person to refuse an activity or stop further participation. In direct marketing, it means taking a step such as unsubscribing from messages. In a default-on arrangement, the activity proceeds unless the person refuses. Having an opt-out does not establish valid consent where the applicable law requires a positive agreement beforehand..
Malware Protection
Applies to: All types
Protect in-scope components with up-to-date anti-malwareSoftware designed to find malicious software, prevent it from infecting computers and, in some cases, remove an existing infection. Malicious software, or malware, includes programs such as viruses and spyware that can damage systems, steal information or disrupt operations. In security requirements, anti-malware refers to this protective capability rather than a particular product..
Logging and Monitoring
Applies to: All types
Record security events and monitor them to detect anomalous activity and operations.
Intrusion Detection (advisory) Recommended
Applies to: A1, A2, A3, A4 (advisory)
Detect and contain anomalous network activity inside and towards the secure zone.
Incident handling
Only Swift CSP no specific requirement on the other side in the acts covered
NIST CSF 2.0 RS.MA, RS.AN, RS.MI · ISO/IEC 27001:2022 A.5.24 to A.5.28
Nothing in the acts covered.
Cyber Incident Response Planning
Applies to: All types
Keep and test a cyber incident response planA written set of instructions for detecting and handling cybersecurity incidents and limiting their consequences. It gives the organisation a prepared approach to follow when systems or information are attacked. In practice, it should make clear who acts, how decisions and communications are handled, and how the response is coordinated. The plan supports the people doing the response work. that covers SwiftSociety for Worldwide Interbank Financial Telecommunication, including informing SwiftSociety for Worldwide Interbank Financial Telecommunication and using its threat intelligenceInformation about cyber threats that has been collected, combined and analysed to help people make security decisions. It adds context to facts about attackers, their methods or signs of an attack, helping an organisation judge what matters to its systems. It can guide monitoring, incident response, information sharing and realistic attack simulations..
Incident classification
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 RS.MA · ISO/IEC 27001:2022 A.5.25
When an incident is severe
Treat an incident as severe if it harms or could harm the product's ability to protect the availabilityThe information-security property that authorised people and systems can access and use information or services when needed, reliably and within an acceptable time. An outage or an attack that overwhelms a service can reduce availability even if no information is stolen or changed. In product security, this includes keeping essential functions accessible and usable., authenticity, integrity or confidentialityThe information-security property of keeping information from being disclosed to people, organisations or systems that are not authorised to receive it. Access restrictions and encryption help preserve confidentiality when information is stored, sent or processed. It concerns who can see information; it does not by itself ensure that the information is accurate or that a service remains available. of sensitive or important data or functions, or if it has introduced or could introduce malicious code into the product or a user's systems.
Nothing in the acts covered.
Reporting to authorities
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 RS.CO · ISO/IEC 27001:2022 A.5.5
Report actively exploited vulnerabilities
Notify any actively exploited vulnerabilityA vulnerability for which there is reliable evidence that a malicious actor has exploited it in a system without the owner's permission. Under the CRA, manufacturers must send an early warning within 24 hours of becoming aware of one in their product, through the single reporting platform. you become aware of to the coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity at the same time. Send an early warning within 24 hours and a vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. notification with general information and mitigations within 72 hours. Send a final report describing the vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition., any malicious actor and the fix no later than 14 days after a corrective or mitigating measure is available. The coordinating CSIRTComputer Security Incident Response Team may ask for an intermediate report.
Report severe incidents
Notify any severe incident affecting the product's security to the coordinating CSIRTComputer Security Incident Response Team and ENISAEuropean Union Agency for Cybersecurity at the same time. Send an early warning within 24 hours stating whether unlawful or malicious acts are suspected, and an incident notification with an initial assessment and mitigations within 72 hours. Send a final report with the root cause and measures within one month of the incident notification. The coordinating CSIRTComputer Security Incident Response Team may ask for an intermediate report.
Reporting route
Submit notifications through ENISAEuropean Union Agency for Cybersecurity's single reporting platform, using the end-point of the coordinating CSIRTComputer Security Incident Response Team in the Member State of your main establishment. Manufacturers without one follow the order in Article 14(7). You may ask for dissemination of a sensitive notification to be delayed on justified cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. grounds.
Voluntary reporting Optional
Applies to: Manufacturers and any other natural or legal person
Any person may voluntarily notify a coordinating CSIRTComputer Security Incident Response Team or ENISAEuropean Union Agency for Cybersecurity of vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition., cyber threatsAny potential circumstance, event or action that could damage, disrupt or otherwise harm network and information systems, their users or other persons. NIS2, DORA, the CRA, the Network Code on Cybersecurity and the Cyber Solidarity Act all use this Cybersecurity Act definition., incidents and near missesAn event that could have compromised the availability, authenticity, integrity or confidentiality of data or of services offered by network and information systems, but was prevented or did not materialise. NIS2 allows voluntary reporting of near misses, and the CRA uses the same definition.. Doing so creates no additional obligations for the person notifying.
Nothing in the acts covered.
Informing customers and the public
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 RS.CO, RC.CO
Set and state the support period
Handle vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. effectively for a support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. that reflects expected use and is at least five years, or the expected use time if shorter. State the end date, at least month and year, clearly at the time of purchase, and notify users when support ends where technically feasible.
Product identity, contact point and instructions
Give the product a type, batch or serial number and show your name and contact details. Designate a single point of contact for users that is not limited to automated tools. Supply the Annex II information and instructions and keep them available for at least 10 years or the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years., whichever is longer.
Cooperate with authorities and announce cessation
On a reasoned request, give the market surveillance authority the information needed to show conformity and cooperate on measures to remove risks. If you are ceasing operations and cannot comply, inform the authorities and, as far as possible, users before this takes effect.
Inform users
After becoming aware of an actively exploited vulnerabilityA vulnerability for which there is reliable evidence that a malicious actor has exploited it in a system without the owner's permission. Under the CRA, manufacturers must send an early warning within 24 hours of becoming aware of one in their product, through the single reporting platform. or severe incident, inform impacted users, and where appropriate all users, and tell them about mitigations they can deploy, where appropriate in a structured, machine-readable format.
Nothing in the acts covered.
Threat intelligence and information sharing
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 ID.RA · ISO/IEC 27001:2022 A.5.6, A.5.7
Voluntary reporting Optional
Applies to: Manufacturers and any other natural or legal person
Any person may voluntarily notify a coordinating CSIRTComputer Security Incident Response Team or ENISAEuropean Union Agency for Cybersecurity of vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition., cyber threatsAny potential circumstance, event or action that could damage, disrupt or otherwise harm network and information systems, their users or other persons. NIS2, DORA, the CRA, the Network Code on Cybersecurity and the Cyber Solidarity Act all use this Cybersecurity Act definition., incidents and near missesAn event that could have compromised the availability, authenticity, integrity or confidentiality of data or of services offered by network and information systems, but was prevented or did not materialise. NIS2 allows voluntary reporting of near misses, and the CRA uses the same definition.. Doing so creates no additional obligations for the person notifying.
Nothing in the acts covered.
Continuity and resilience
Business continuity and crisis management
Only CRA no specific requirement on the other side in the acts covered
NIST CSF 2.0 RC.RP, RC.CO · ISO/IEC 27001:2022 A.5.29, A.5.30
Availability of essential functions
Where applicable, protect the availabilityThe information-security property that authorised people and systems can access and use information or services when needed, reliably and within an acceptable time. An outage or an attack that overwhelms a service can reduce availability even if no information is stolen or changed. In product security, this includes keeping essential functions accessible and usable. of essential and basic functions, also after an incident, including resilience against denial-of-service attacks. Minimise the product's negative impact on services provided by other devices or networks.
Nothing in the acts covered.
Security testing
CRA asks more binding, where the other is optional
NIST CSF 2.0 ID.IM · ISO/IEC 27001:2022 A.5.35, A.8.29, A.8.34
Test, fix and disclose vulnerabilities
Remediate vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without delay, with security updates separate from functional ones where feasible, distributed securely and free of charge unless agreed otherwise for tailor-made products. Test and review security regularly. Enforce a coordinated vulnerability disclosureA process in which someone who discovers a security weakness reports it to the system owner or product supplier and works with them to address it. The parties coordinate investigation, a fix and the timing and content of any public disclosure, reducing the chance of exposing users before protection is available. A national cybersecurity centre may help coordinate when several parties are involved or contact fails. policy, provide a reporting contact, and publish information on fixed vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition..
Penetration Testing (advisory) Recommended
Applies to: All types (advisory)
Test the security of the SwiftSociety for Worldwide Interbank Financial Telecommunication environment through penetration tests.
Third parties and supply chain
Supplier and third-party risk
CRA more detailed more requirements on this, not necessarily stricter
NIST CSF 2.0 GV.SC · ISO/IEC 27001:2022 A.5.19, A.5.21 to A.5.23
Third-party components
Exercise due diligence when integrating third-party components, including open-source ones, so they do not compromise the product. If you find a vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. in a component, report it to whoever makes or maintains the component and remediate it, sharing your fix where you developed one.
Importer checks
Applies to: Importers
Place on the market only products and manufacturer processes that meet Annex I. First ensure the conformity assessmentThe process of verifying whether a product, service or system meets the requirements set by the applicable EU act, for example the essential cybersecurity requirements of the CRA or the high-risk requirements of the AI Act. Depending on the risk class, the manufacturer does it alone or with a notified body. and technical documentation exist, the product has CE markingA marking by which a manufacturer or provider indicates that a product conforms to the applicable EU harmonisation legislation. Under the AI Act, high-risk AI systems must bear the CE marking, and the same mechanism applies under other product laws., EU declaration and instructions, and the identification and support-date duties are met. Show your own contact details on the product, its packaging or an accompanying document.
Distributor checks and cooperation
Applies to: Distributors
Act with due care. Before making a product available, verify the CE markingA marking by which a manufacturer or provider indicates that a product conforms to the applicable EU harmonisation legislation. Under the AI Act, high-risk AI systems must bear the CE marking, and the same mechanism applies under other product laws. and that the manufacturer and importer met their identification, instruction, support-date and declaration duties. Hold back non-conforming products and cooperate with the authority on reasoned request.
Software bill of materials
Identify and document vulnerabilitiesA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. and components, including a software bill of materialsA formal record of the details and supply chain relationships of the components included in the software of a product. Under the CRA, manufacturers must draw up an SBOM in a commonly used, machine-readable format covering at least the top-level dependencies. in a commonly used, machine-readable format covering at least the top-level dependencies.
Outsourced Critical Activity Protection
Applies to: All types
Ensure that critical activities outsourced to third parties are protected to the same standard.
Privacy and data protection
Privacy by design and by default
Only CRA no specific requirement on the other side in the acts covered
NIST Privacy Framework CT.DP-P
Minimise data and allow removal
Where applicable, process only data that is adequate, relevant and limited to the product's purpose. Let users securely and easily remove all data and settings permanently, and make any transfer to other products secure.
Nothing in the acts covered.
Supervision and enforcement
Cooperation with supervisors
Only CRA no specific requirement on the other side in the acts covered
Cooperate with authorities and announce cessation
On a reasoned request, give the market surveillance authority the information needed to show conformity and cooperate on measures to remove risks. If you are ceasing operations and cannot comply, inform the authorities and, as far as possible, users before this takes effect.
Importer corrective action and alerts
Applies to: Importers
Hold back non-conforming products and take corrective measures, withdraw or recall those already placed. Inform the manufacturer of any vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without undue delay, and where a product presents a significant cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risk, immediately inform the market surveillance authorities.
Importer records and cooperation
Applies to: Importers
Keep the EU declaration of conformity for at least 10 years after the product is placed on the market, or for the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer, and ensure the technical documentation can be made available on request. Provide information to the authority on reasoned request and cooperate. If the manufacturer has ceased operations, inform the authorities and, where possible, users.
Distributor checks and cooperation
Applies to: Distributors
Act with due care. Before making a product available, verify the CE markingA marking by which a manufacturer or provider indicates that a product conforms to the applicable EU harmonisation legislation. Under the AI Act, high-risk AI systems must bear the CE marking, and the same mechanism applies under other product laws. and that the manufacturer and importer met their identification, instruction, support-date and declaration duties. Hold back non-conforming products and cooperate with the authority on reasoned request.
Distributor corrective action and alerts
Applies to: Distributors
Make sure corrective measures, withdrawal or recall take place for non-conforming products. Inform the manufacturer of any vulnerabilityA weakness, susceptibility or flaw that a threat can exploit. NIS2 applies it to ICT products and services, the CRA to products with digital elements and DORA to any asset, system, process or control. Coordinated vulnerability disclosure and handling duties build on this definition. without undue delay. Immediately inform market surveillance authorities of a significant cybersecurityThe activities needed to protect network and information systems, their users and other persons affected by cyber threats. NIS2 and the CRA adopt this Cybersecurity Act definition, so it frames most EU cybersecurity obligations. risk. If the manufacturer has ceased operations, inform the authorities without undue delay and, as far as possible, users.
Technical documentation
Draw up technical documentation with at least the Annex VII elements before placing the product on the market and update it as needed, at least during the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years.. Keep it and the EU declaration available to the market surveillance authorities for at least 10 years after the product is placed on the market, or for the support periodThe period during which a manufacturer must ensure that vulnerabilities of a product with digital elements are handled effectively and in line with the CRA vulnerability handling requirements. It must reflect the expected time of use and is generally at least five years. if longer.
Fines for misleading information
Applies to: Economic operators
Supplying incorrect, incomplete or misleading information to notified bodiesA conformity assessment body that a Member State has notified to the Commission as competent to carry out third-party assessment under EU legislation. Whether a manufacturer or provider must involve one depends on the applicable act, system or product classification and conformity assessment route; not every high-risk AI system requires a notified body. and market surveillance authorities in reply to a request carries fines of up to EUR 5 million or 1% of total worldwide annual turnover, whichever is higher.
Nothing in the acts covered.
Penalties and liability
Only CRA no specific requirement on the other side in the acts covered
Fines for essential requirements and reporting
Applies to: Manufacturers
Breach of Annex I or of Articles 13 and 14 carries fines of up to EUR 15 million or 2.5% of total worldwide annual turnover, whichever is higher. Micro and small enterprises are not fined for missing the 24-hour early warning, and open-source software stewardsA legal person, other than a manufacturer, that systematically provides sustained support for the development of free and open-source software intended for commercial activities and ensures its viability, such as a foundation. The CRA gives stewards a lighter regime instead of full manufacturer obligations. are not fined for any infringement.
Fines for other operator obligations
Applies to: Economic operators and others subject to the listed articles
Breach of Articles 18 to 23, 28, 30(1) to (4), 31(1) to (4), 32(1) to (3), 33(5) and certain other listed articles carries fines of up to EUR 10 million or 2% of total worldwide annual turnover, whichever is higher.
Fines for misleading information
Applies to: Economic operators
Supplying incorrect, incomplete or misleading information to notified bodiesA conformity assessment body that a Member State has notified to the Commission as competent to carry out third-party assessment under EU legislation. Whether a manufacturer or provider must involve one depends on the applicable act, system or product classification and conformity assessment route; not every high-risk AI system requires a notified body. and market surveillance authorities in reply to a request carries fines of up to EUR 5 million or 1% of total worldwide annual turnover, whichever is higher.
Nothing in the acts covered.
Requirements are summarised in plain words; the official text prevails. Verdicts compare what the acts covered state, not how a supervisor applies them. Most topics are cross-referenced to NIST CSF 2.0 and ISO/IEC 27001:2022.
More Comparisons
Subject to more than one?
We run one control set for both, without doing the work twice. Ask what that saves you.